Datagrid and Charting for Enterprise Applications
webpack
Proud to partner with webpack

To v5 from v4

This guide aims to help you migrating to webpack 5 when using webpack directly. If you are using a higher level tool to run webpack, please refer to the tool for migration instructions.

Preparations

Webpack 5 requires at least Node.js 10.13.0 (LTS), so make sure you upgrade your Node.js if you're still running an older one.

Upgrade webpack 4 and its plugins/loaders

  1. Upgrade webpack 4 to the latest available version.

    • When using webpack >= 4, upgrading to the latest webpack 4 version should not require additional guidance.

    • If you are using webpack version less than 4 please see the webpack 4 migration guide.

  2. Upgrade webpack-cli to the latest available version (when used)

  3. Upgrade all used Plugins and Loaders to the latest available version

    Some Plugins and Loaders might have a beta version that has to be used in order to be compatible with webpack 5. Make sure to read release notes of each individual plugin/loader when upgrading it, since latest version might only support webpack 5 and will fail in v4. In such case, it's recommended to update to the latest version that supports webpack 4.

Codemods

To assist with the upgrade from webpack v4 to v5, Codemod provides open-source community codemods that can help automate most of the migration process.

Please note that these are not official webpack codemods, and while it aims to streamline the migration, it may not cover all cases. You may still need to perform additional manual steps to fully complete the upgrade.

Run the webpack v5 migration codemods:

npx codemod webpack/v5/migration-recipe

This will run the following codemods from Codemod registry:

Each of these codemods automates a change listed in the webpack v5 migration guide. For a complete list of available webpack v5 codemods, see Codemod Registry.

Make sure your build has no errors or warnings

There might be new errors or warnings because of the upgraded versions of webpack, webpack-cli, Plugins and Loaders. Keep an eye for deprecation warnings during the build.

You can invoke webpack this way to get stack traces for deprecation warnings to figure out which Plugins and Loaders are responsible.

node --trace-deprecation node_modules/webpack/bin/webpack.js

As webpack 5 removes all deprecated features, make sure there's no webpack deprecation warnings during the build in order to proceed.

Make sure to use mode

Set mode to either production or development to make sure that corresponding defaults are set.

Update outdated options

Update the following options to their new version (if used):

  • optimization.hashedModuleIds: true → optimization.moduleIds: 'hashed'
  • optimization.namedChunks: true → optimization.chunkIds: 'named'
  • optimization.namedModules: true → optimization.moduleIds: 'named'
  • NamedModulesPlugin → optimization.moduleIds: 'named'
  • NamedChunksPlugin → optimization.chunkIds: 'named'
  • HashedModuleIdsPlugin → optimization.moduleIds: 'hashed'
  • optimization.noEmitOnErrors: false → optimization.emitOnErrors: true
  • optimization.occurrenceOrder: true → optimization: { chunkIds: 'total-size', moduleIds: 'size' }
  • optimization.splitChunks.cacheGroups.vendors → optimization.splitChunks.cacheGroups.defaultVendors
  • optimization.splitChunks.cacheGroups.test(module, chunks) → optimization.splitChunks.cacheGroups.test(module, { chunkGraph, moduleGraph })
  • Compilation.entries → Compilation.entryDependencies
  • serve → serve is removed in favor of DevServer
  • Rule.query (deprecated since v3) → Rule.options/UseEntry.options
  • Rule.loaders → Rule.use

Test webpack 5 compatibility

Try to set the following options in your webpack 4 configuration and check if build still works correctly.

module.exports = {
  // ...
  node: {
    Buffer: false,
    process: false,
  },
};

You have to remove these options again when upgrading your configuration for webpack 5.

Upgrade webpack to 5

Now let's upgrade webpack to version 5:

  • npm: npm install webpack@latest

  • Yarn: yarn add webpack@latest

If you were not able to upgrade some plugins/loaders to the latest in Upgrade webpack 4 and its plugins/loaders step, don't forget to upgrade them now.

Clean up configuration

  • Consider removing optimization.moduleIds and optimization.chunkIds from your webpack configuration. The defaults could be better, because they support long term caching in production mode and debugging in development mode.

  • When using [hash] placeholder in webpack configuration, consider changing it to [contenthash]. It is not the same, but proven to be more effective.

  • If you are using Yarn's PnP and the pnp-webpack-plugin, we have good news: it is supported by default now. You have to remove it from the configuration.

  • If you are using IgnorePlugin with a regular expression as argument, it takes an options object now: new IgnorePlugin({ resourceRegExp: /regExp/ }).

  • If you are using something like node.fs: 'empty' replace it with resolve.fallback.fs: false.

  • If you are using watch: true in webpack Node.js API, remove it. There's no need to set it as it's indicated by the compiler method you call, either true for watch() or false for run().

  • If you have rules defined for loading assets using raw-loader, url-loader, or file-loader, please use Asset Modules instead as they're going to be deprecated in near future.

  • If you have target set to a function, update it to false and apply that function within plugins option. See example below:

    // for webpack 4
{
    target: WebExtensionTarget(nodeConfig)
}

// for webpack 5
{
    target: false,
    plugins: [
        WebExtensionTarget(nodeConfig)
    ]
}

    Note: Codemod for this Chnages:

    npx codemod set-target-to-false-and-update-plugins

    (See the registry here.)

  • If you have output.library or output.libraryTarget defined, change the property names: (output.libraryTarget -> output.library.type, output.library -> output.library.name). Example

    // for webpack 4
{
    output: {
      library: 'MyLibrary',
      libraryTarget: 'commonjs2'
    }
}

// for webpack 5
{
    output: {
      library: {
        name: 'MyLibrary',
        type: 'commonjs2'
      }
    }
}

    Note: Codemod for this Chnages:

    npx codemod webpack/v5/migrate-library-target-to-library-object

    (See the registry here.)

If you were using WebAssembly via import, you should follow this two step process:

  • Enable the deprecated spec by setting experiments.syncWebAssembly: true, to get the same behavior as in webpack 4.
  • After successful migration to webpack 5, change the experiments value to experiments: { asyncWebAssembly: true } to use the up-to-date spec for WASM integration.

Reconsider optimization.splitChunks:

  • It's recommended to use either the defaults or optimization.splitChunks: { chunks: 'all' }.
  • When using a custom configuration, drop name: false and replace name: string | function with idHint: string | function.
  • It was possible to turn off the defaults by setting optimization.splitChunks.cacheGroups: { default: false, vendors: false }. We don't recommend doing this, but if you really want to get the same effect in webpack 5: optimization.splitChunks.cacheGroups: { default: false, defaultVendors: false }.

Consider removing defaults:

  • Using entry: './src/index.js': you can omit it, that's the default.
  • Using output.path: path.resolve(__dirname, 'dist'): you can omit it, that's the default.
  • Using output.filename: '[name].js': you can omit it, that's the default.

Need to support an older browser like IE 11?

  • If you have browserslist enabled for your project, webpack 5 will reuse your browserslist config to decide which code style to emit for the runtime code.

    Make sure to:

    1. set target to browserslist or remove target letting webpack set browserslist automatically for you.
    2. add a IE 11 to your browserslist configuration.

  • Without a browserslist webpack's runtime code uses ES2015 syntax (e.g., arrow function) to build smaller bundles. Hence you'll need to set target: ['web', 'es5'] to use the ES5 syntax for browsers (like IE11) which don't support ES2015 syntax .

  • For Node.js, builds include the supported Node.js version in the target option and webpack will automatically figure out which syntax is supported, e.g. target: 'node8.6'.

Cleanup the code

Using /* webpackChunkName: '...' */

Make sure to understand the intention:

  • The chunk's name here is intended to be public.
  • It's not a development-only name.
  • Webpack will use it to name files in production and development modes.
  • Webpack 5 will automatically assign useful file names in development mode even when not using webpackChunkName.

Using named exports from JSON modules

This is not supported by the new specification and you will get a warning. Instead of:

import { version } from './package.json';
console.log(version);

use:

import pkg from './package.json';
console.log(pkg.version);

Note: Codemod for this Chnages:

npx codemod codemod webpack/v5/json-imports-to-default-imports

(See the registry here.)

Cleanup the build code

  • When using const compiler = webpack(...);, make sure to close the compiler after using it: compiler.close(callback);.
    • This doesn't apply to the webpack(..., callback) form which automatically closes.
    • This is optional if you use webpack in watching mode until the user ends the process. The idle phases in watch mode will be used for this kind of work.

Run a single build and follow advice

Please make sure to read the building errors/warnings carefully. If there is no corresponding advice, please create an issue and we will try to resolve it.

Repeat the following steps until you solved at least level 3 or 4:

  • Level 1: Schema validation fails.

    Configuration options have changed. There should be a validation error with a BREAKING CHANGE: note, or a hint of which option should be used instead.

  • Level 2: Webpack exits with an error.

    The error message should tell you what needs to be changed.

  • Level 3: Build Errors.

    The error message should have a BREAKING CHANGE: note.

  • Level 4: Build Warnings.

    The warning message should tell you what can be improved.

  • Level 5: Runtime Errors.

    This is tricky. You probably have to debug to find the problem. General advice is difficult here. But we do list some common advice below regarding Runtime Errors:

    • process is not defined.
      • webpack 5 does no longer include a polyfill for this Node.js variable. Avoid using it in the frontend code.
      • Want to support browser usage? Use the exports or imports package.json field to use different code depending on the environment.
        • Also use the browser field to support older bundlers.
        • Alternative: Wrap code blocks with the typeof process checks. Note that this will have a negative impact on the bundle size.
      • Want to use environment variables with process.env.VARIABLE? You need to use the DefinePlugin or EnvironmentPlugin to define these variables in the configuration.
        • Consider using VARIABLE instead and make sure to check typeof VARIABLE !== 'undefined' too. process.env is Node.js specific and should be avoided in frontend code.
    • 404 errors pointing to URLs containing auto
      • Not all ecosystem tooling is ready for the new default automatic publicPath via output.publicPath: "auto"
        • Use a static output.publicPath: "" instead.

  • Level 6: Deprecation Warnings.

    You probably get a lot of deprecation warnings. This is not directly a problem. Plugins need time to catch up with core changes. Please report these deprecations to the plugins. These deprecations are only warnings and the build will still work with only minor drawbacks (like less performance).

    • You can hide deprecation warnings by running node with --no-deprecation flag, e.g.: node --no-deprecation node_modules/webpack/bin/webpack.js. This should only be a temporary workaround.
    • Plugins and Loaders contributors can follow the advice in the deprecation messages to improve the code.

  • Level 7: Performance issues.

    Usually, performance should improve with webpack 5, but there are also a few cases where performance gets worse.

    And here are something you can do to improve the situation:

    • Profile where the time is spent.
      • --profile --progress displays a simple performance profile now
      • node --inspect-brk node_modules/webpack/bin/webpack.js + chrome://inspect / edge://inspect (see profiler tab).
        • You can save these profiles to files and provide them in issues.
        • Try using --no-turbo-inlining flag for better stack traces in some cases.
    • Time for building modules in incremental builds can be improved by reverting to unsafe caching like in webpack 4:
      • module.unsafeCache: true
      • But this might affect the ability to handle some of the changes to the code base
    • Full build
      • Backward-compatibility layer for the deprecated features will usually have worse performance compared to the new features.
      • Creating many warnings can affect build performance, even if they are ignored.
      • Source Maps are expensive. Check devtool option in the documentation to see a comparison of the different options.
      • Anti-Virus protection might affect performance of the file system access.
      • Persistent Caching can help to improve the repetitive full builds.
      • Module Federation allows to split the application into multiple smaller builds.

Everything works?

Please tweet that you have successfully migrated to webpack 5. Tweet it

It is not working?

Create an issue and tell us about the issues you have encountered during the migration.

Something missing in this guide?

Please open a Pull Request to help the next person using this guide.

Changes to internals

The changes to webpack internals such as: adding types, refactoring code and methods renaming are listed here for anyone interested. But they are not intended as a part of common use-case migration.

  • Module.nameForCondition, Module.updateCacheModule and Module.chunkCondition are no longer optional.

getOptions method for Loaders

Webpack 5 ships with built-in this.getOptions method available in loader context. This is a breaking change for loaders that had been using getOptions method from previously preferred schema-utils:

  • this.getOptions is available since webpack 5
  • Instead of JSON5 it supports JSON as a query string: ?{arg:true} → ?{"arg":true}. Using JSON5 should be considered and documented as deprecated in favor of JSON in the respective Loader's documentation.
  • loader-utils has specific behavior for parsing query strings (true, false and null won't be parsed as string but as a primitive value). This is no longer the case for the new built-in this.getOptions method, which uses native querystring parsing (ships with Node.js). It is still possible to add custom behavior for these cases in the Loader's code after getting the options by using this.getOptions method.
  • Schema argument is optional for the new this.getOptions method, but we strongly advise to add schema validation for your Loader's options. The title field in the schema, can be used to customize the validation error message e.g. "title": "My Loader ooooptions" will result in displaying errors this way: Invalid ooooptions object. My Loader has been initialised using an ooooptions object that does not match the API schema. - ooooptions.foo.bar.baz should be a string.
Edit this page·Print this page
« Previous
Migrate
Next »
To v4 from v3

11 Contributors

sokrasalemhilalkeichingerEugeneHlushkoMattGoldwaterrramaachenxsanjamesgeorge007getsnoopyyevhen-logoshaakash-kumar-dev